Equipment / Model Comparison
Compare Equipment Models
Compare 30 published configurations across dispensing, coating, AOI and SPI. Start with the process, then review board dimensions, transport and configuration requirements.
Conformal Coating
Motion travel and board capacity are different measurements. Review the exact variant and usable area.
| Model / details | Configuration | Working envelope | Selection notes |
|---|---|---|---|
| G210-F5 / F3L family | 3-axis / 5-axis variants | Variant-dependent travel; see product table | Select the F5, F3L or custom variant before comparing dimensions. |
| G210-F4 family | 4-axis; inline rail | Travel: 450 × 450 × 100 or 200 × 450 × 100 mm | Valve arrangement changes the usable coating travel. |
| G210-F3 family | 3-axis; inline rail | F3 travel: 450 × 450 × 100 mm; other variants differ | Compare F3 / F3A / F3B / F3C valve layouts. |
| G310-F | Robotic 4-axis / 5-axis; inline rail | Standard PCBA: 50 × 50 to 450 × 450 mm | Confirm the selected robot and valve access. |
| G310-T | Robotic 4-axis / 5-axis; rail/belt options | Standard PCBA: 50 × 50 to 450 × 450 mm | Confirm the exact belt/rail installation arrangement. |
| G210 | Cartesian 3-axis / 4-axis / 5-axis | Standard PCBA: 50 × 50 to 450 × 450 mm | Select axes and coating paths for component access. |
Precision Dispensing
Motion travel and board capacity are different measurements. Review the exact variant and usable area.
| Model / details | Configuration | Working envelope | Selection notes |
|---|---|---|---|
| High-Speed Inline family | 3-axis / 5-axis / large-format / linear-motor variants | Travel: 500 × 400 × 50 or 900 × 600 × 50 mm | Family listing; confirm the exact model and drive configuration. |
| G400-F3C family | 3-axis; rail; single/dual-valve configurations | Single-valve travel: 350 × 450 mm; other configurations differ | Lane and valve choices change usable travel; confirm filtration requirements. |
| G201-F3 | 3-axis Cartesian; inline rail | Travel: 500 × 400 × 50 mm | Review valve, material and inspection options. |
| G200-T5 | 5-axis Cartesian; belt-side installation | PCBA at 0°: 600 × 450 mm; at 60°: 340 × 370 mm | Usable board area decreases as nozzle angle increases. |
| G200-F5 | 5-axis Cartesian; inline rail | PCBA at 0°: 500 × 450 mm; at 60°: 270 × 370 mm | Check board geometry at the required nozzle angle. |
| G300-F5 | 5-axis Cartesian listed; conveyor installation: confirm | Documented PCBA at 0°: 500 × 400 mm; confirm configuration | The overview specifies inline rail integration; the installation row says belt-side mounting. Confirm the conveyor drawing. |
| G300-T5 | 5-axis robotic; belt-side installation | PCBA at 0°: 500 × 400 mm; at 60°: 270 × 300 mm | Confirm tracking, stationary or intermittent operating mode. |
3D AOI
Compare track use, board size and optics together. Transport clearance is different from validated inspection height.
| Model / details | Configuration | Working envelope | Selection notes |
|---|---|---|---|
| Venus 810 | PCB 3D optical inspection | PCB: 50 × 50 to 810 × 690 mm | Confirm optics, component clearance and acceptance criteria. |
| Venus 1500 | Large-format CCS inspection | CCS: 50 × 50 to 1550 × 510 mm | Confirm optics, component clearance and acceptance criteria. |
| Venus 510D | Dual-track configuration | Same-PCB condition: 510 × 320 mm; Different-PCB condition: 510 × 590 mm | Board-width limits depend on track use; confirm both lane assignments. |
| Venus 810D | Dual-track configuration | Same-PCB condition: 810 × 320 mm; Different-PCB condition: 810 × 590 mm | Board-width limits depend on track use; confirm both lane assignments. |
| Venus 360 | PCB 3D optical inspection | PCB: 50 × 50 to 360 × 320 mm | Confirm optics, component clearance and acceptance criteria. |
| Venus 510 | PCB 3D optical inspection | PCB: 50 × 50 to 510 × 510 mm | Confirm optics, component clearance and acceptance criteria. |
| Venus 1200 | Large-format CCS inspection | CCS: 50 × 50 to 1250 × 510 mm | Confirm optics, component clearance and acceptance criteria. |
| Venus 2000 | Large-format CCS inspection | CCS: 50 × 50 to 2050 × 510 mm | Confirm optics, component clearance and acceptance criteria. |
2D AOI
Compare track use, board size and optics together. Transport clearance is different from validated inspection height.
| Model / details | Configuration | Working envelope | Selection notes |
|---|---|---|---|
| Isee 810 | Single-track configuration | PCB: 50 × 50 to 810 × 690 mm | Confirm optics, component clearance and acceptance criteria. |
| Isee 510 | Single-track configuration | PCB: 50 × 50 to 510 × 510 mm | Confirm optics, component clearance and acceptance criteria. |
| Isee 810D | Dual-track configuration | Same-PCB condition: 810 × 320 mm; Different-PCB condition: 810 × 590 mm | Board-width limits depend on track use; confirm both lane assignments. |
| Isee 510D | Dual-track configuration | Same-PCB condition: 510 × 320 mm; Different-PCB condition: 510 × 590 mm | Board-width limits depend on track use; confirm both lane assignments. |
| Feye 350 | Offline 2D optical inspection | PCB: 50 × 50 to 350 × 280 mm | Confirm optics, component clearance and acceptance criteria. |
3D SPI
Compare track use, board size and optics together. Transport clearance is different from validated inspection height.
| Model / details | Configuration | Working envelope | Selection notes |
|---|---|---|---|
| Ican 810 | Single-track configuration | PCB: 50 × 50 to 810 × 690 mm | Inspect paste after printing; confirm pad geometry and measurement criteria. |
| Ican 510 | Single-track configuration | PCB: 50 × 50 to 510 × 510 mm | Inspect paste after printing; confirm pad geometry and measurement criteria. |
| Ican 810D | Dual-track configuration | Same-PCB condition: 810 × 320 mm; Different-PCB condition: 810 × 590 mm | Board-width limits depend on track use; confirm both lane assignments. |
| Ican 510D | Dual-track configuration | Same-PCB condition: 510 × 320 mm; Different-PCB condition: 510 × 590 mm | Board-width limits depend on track use; confirm both lane assignments. |
Match the Configuration to Your Process
Share board drawings, materials or inspection samples, production flow and acceptance criteria. JCX will help review the applicable configuration. Values are selection references; confirm the ordered equipment specification.